X10 xx16a manual

You can attach it to a wall anywhere you want to monitor. The XM13A power supply lets you turn the camera on and off remotely, from.

Refer to the setup and operating instructions that came. Mount the camera in a suitable location with the antenna. If you install it. Plug the power supply's jack into the adapter cable on. Set the Housecode and Unit Code.

See instructions. Set the channel switch on the camera to the same setting. Adjust the antenna on the camera if necessary to aim it. X10 agrees to repair or replace, at it's sole.

RMA number. Please do not return any products without an. Thank you. This manual is also suitable for: Xcam2 xx16a. The computer will recognize that new hardware has been installed and complete the installation. After the installation finishes, run the iWatchMobile Pro installer. Make sure the receiver is turned on; the power switch is next to the antenna hinge. Adjust the paddle-shaped so that it it faces in the general direction of all the cameras -- sometimes it may be best to point the antenna towards the ceiling.

Plug the power supply into a free AC outlet. Connect the camera to the power supply. The camera should come on and you should be able to get the picture on your PC. Adjust the antenna so that it points better at the antenna of the receiver. If you only have one camera, skip to Software Configuration below. You want all the cameras, remotes, and the TM on the same House Code; the cameras should be at sequential Unit Codes usually 1,2,3, etc.

You should see the camera picture go away, indicating that the camera has received the signal from the TM transceiver. Run the ActiveHome Pro software. If you get an error message about the VA12A video adapter, please see this article. Register your software and plugins. Locate the Group Pane which says Rooms at the top on the left side of the screen. Locate the Modules category. If you do not see a list of module types under that category, click the down-pointing-arrows-in-a-circle icon immediately to the right of the word Modules.